Download  Print this page

Connecting The Transceiver Connection Cable - Kenwood WD-K10 Series User Manual

Dect intercom system
Hide thumbs

Advertisement

Table of Contents
2 PREPARATION
2.1 Preparing the Device

Connecting the Transceiver Connection Cable

Connect the transceiver connection cable WD-RC100 or WD-RC50 to allow communication between the DECT intercom
system WD-K10 series and external wireless systems (KENWOOD brand).
0
Compatible models:
Two-way radios of the KENWOOD brand that can be connected to the transceiver connection cable WD-RC100 or WD-
RC50 are as follows:
WD-RC100: NX-200G, NX-300G, NX-5200, NX-5300
WD-RC50: NX-220, NX-320, TK-2000, TK-3000, TK-2302, TK-3302, TK-3401D, TK-3501
Precautions
0
As far as possible, use the transceiver and portable base at a distance away from external wireless systems.
An error due to radio wave interference may occur if they are too near.
0
Do not connect any two-way radios other than the compatible models.
0
To communicate with external wireless systems, the "PMR Link" function must first be assigned.
For details on assigning the function, please consult the authorized dealer or installer.
Connecting to a Portable base WD-K10PBS
Insert the connecting plug into the connecting jack of the transceiver, and secure by turning the cap in the direction of the
arrow.
Contents
30

Advertisement

Table of Contents
loading

  Related Manuals for Kenwood WD-K10 Series

  Related Content for Kenwood WD-K10 Series

This manual is also suitable for:

Wd-k10pbsWd-k10bsWd-k10tr