Clip Microphone With Earphone Emc-14 - Kenwood WD-K10 Series User Manual

1 INTRODUCTION
1.8 Part Names and Functions (Device Connection Method)

Clip Microphone with Earphone EMC-14

Microphone clip
A
Use this to attach to the collar of your clothes.
[PTT] key
B
Press this key for business contact as an intercom.
Transceiver connection plug
C
For connecting to an appropriate transceiver.
Microphone
D
The microphone is a close-talking type microphone. To speak, place your mouth close to the microphone. (5 cm)
Earphone
E
Insert into your ear to listen to the conversation.
Precautions
0 Insert firmly into the terminal so that the plug does not come off, and tighten the cap. If the cap is not fully tightened, poor
connection with the transceiver and noise may occur. Note that this is not water resistant.
0
When the plug is dirty, noise may occur during conversation. Wipe with a dry cloth regularly.
0 Be sure to connect or disconnect the plug only when the power is turned off.
A
B
C
D
E
Contents
22