1 INTRODUCTION
1.8 Part Names and Functions (Device Connection Method)
Underneath the Cover (DC Plug Area)
There is a packing for the DC plug area underneath the cover (DC plug area). Remove the packing to use the DC IN jack,
Data setting connector and Baselink/ External Control terminal block.
Precautions
0
When the DC plug is dirty, noise may occur during conversation. Wipe with a dry cloth regularly.
0
Be sure to connect or disconnect the DC plug only when the power is turned off.
DC IN jack
F
For connecting the DC plug of the AC adapter.
Data setting connector
G
For registering the base station to the system or changing the settings using the Programming Software.
Normally not used. Do not touch the connector.
F
G
H
Packing for
DC plug area
Contents
16