Performing Pmr Link By Pressing The Pmr Link] Key - Kenwood WD-K10 Series User Manual

3 MAKING A CALL
3.6 Performing PMR Link
Performing PMR Link by Pressing the [PMR Link] Key
By assigning the PMR Link function to any function key as a [PMR Link] key, you can activate the PMR Link function by
pressing the key.
1
Press the [PMR Link]
The PMR Link function will activate and a mode change tone will emit.
2
Speak into the microphone while pressing the
Release the [PTT] key to end the call.
3
To end the PMR Link, press the
A mode change tone will emit and users will return to the "Group Call Mode" of their own groups.
Note
The PMR Link function is canceled in the following cases.
0
When the time configured in PMR Link Time-out Timer has lapsed.
0
When the power of the transceiver that has started Broadcast is turned off, or when it is out of range.
0
When All Call has started.
0
key.
[PTT]
[PMR Link] key.
PMR Link
key on the clip microphone or transceiver.
Contents
56