Headset Khs-37 - Kenwood WD-K10 Series User Manual

1 INTRODUCTION
1.8 Part Names and Functions (Device Connection Method)

Headset KHS-37

Microphone clip with [PTT] key
A
Press this key for business contact as an intercom.
Transceiver connection plug
B
For connecting to an appropriate transceiver.
Microphone
C
To speak, adjust the boom microphone such that it is about 1 cm away from your mouth.
The boom microphone can be moved up and down.
Cord clip
D
Use this to clip the cord to the collar of your clothes when it gets in the way.
Earphone
E
Insert into your ear to listen to the conversation.
Precautions
0
Insert firmly into the terminal so that the plug does not come off, and tighten the cap. If the cap is not fully tightened, poor
connection with the transceiver and noise may occur. Note that this is not water resistant.
0
When the plug is dirty, noise may occur during conversation. Wipe with a dry cloth regularly.
0
Be sure to connect or disconnect the plug only when the power is turned off.
A
B
C
D
E
Contents
23