Changing Groups - Kenwood WD-K10 Series User Manual

4 USING LISTENING MODE

4.4 Changing Groups

4.4 Changing Groups
Only groups in which voice channels 1 to 4 have been configured in Groups A to D can be switched.
Precautions
0 The group that has been pre-configured in the system will be switched. For details on group settings, please consult the
authorized dealer or installer.
0 The maximum number of connected sub units depends on the number of groups configured.
For details, please consult the authorized dealer or installer.
0 Groups cannot be changed during Listening Talk. Groups can be changed when units are in call-receiving only mode.
0
The [Group Select] key is not assigned by default. Assign the function to any function keys.
To configure the setting, consult the authorized dealer or installer.
1
Press the [Group Select]
The Status LED lights up in red.
After a while, the Status LED blinks in blue, and the corresponding Group LED will light up. When the group is
changed, the corresponding Group LED blinks and calls in the connected group can be heard.
2
Speak into the microphone while pressing the
3
To return to the original group, press the
The unit will return to its listening group.
key.
Group LED
Status LED
[PTT]
[Group Select]
Group Select
key on the clip microphone or transceiver.
key to change the group.
Contents
67