Manual Reconnection (Transceiver Mode Only) - Kenwood WD-K10 Series User Manual

2 PREPARATION
2.4 Setting Various Functions

Manual Reconnection (Transceiver Mode Only)

Reconnect regardless of the radio wave status.
Precautions
0
The [Manual Reconnection] key is not assigned by default. Assign the function to any function keys.
For details on the settings, please consult the authorized dealer or installer.
1
Press the [Manual Reconnection]
Current connection with the base unit (Portable base or Base station) will be cut off.
The Status LED lights up in red.
Once the unit is reconnected to the base unit, a voice announcement will be played and the Status LED blinks in
green.
Note
The voice announcement may not be played depending on the transceiver settings. (
0
key.
Status LED
Manual Reconnection
on page 47)
Contents
45