Download  Print this page

Kenwood WD-K10 Series User Manual page 43

Dect intercom system
Hide thumbs

Advertisement

Table of Contents
2 PREPARATION
2.4 Setting Various Functions
4
Press the
[PTT]
key and confirm a setup item.
5
Press the [J], [K] key and select a setting.
A voice announcement will be played for the setting details every time a setting is switched. To return to selecting a
setup item, press the [PF 1] key.
6
Press the
[PTT]
key to confirm a setting.
7
Press and hold the
Save the setting. Restart the transceiver and return to Group Call Mode.
0
Settings in setup menu mode
*: Default setting
Item
(Voice Announcement)
Base Station Select
(Base Select)
Talk Setting
(Talk Setting)
VOX Sensitivity
(VOX Level)
Mic Gain
(Mic Gain)
[PF 2]
key.
Settings
Auto*/Base 1/Base 2/Base
3/Base 4/Base 5/Base 6
PTT*/PTT-Lock/VOX
Level 1 - Level 5
(3*)
Level 1 - Level 5
(3*)
Content
Switches the base unit (Portable base or Base station) to
be connected.
If "Auto" is selected, the base station to be connected will
be automatically selected.
Switches the operation of the [PTT] key.
* PTT:
You can make a call while the [PTT] key on this transceiver
or the clip microphone is being pressed.
* PTT-Lock:
Press the [PTT] key on this transceiver or the clip
microphone to call. Press it again to end the call. If "PTT-
Lock Delay"is configured, the call ends automatically when
the duration configured elapses.
* VOX:
The microphone automatically turns ON in response to
audio signals. Hands-free call is possible without having to
press the [PTT] key.
Sets the sensitivity when the Talk Setting is set to "VOX".
Adjusts the input sensitivity of the microphone.
Contents
42

Advertisement

Table of Contents
loading

  Related Manuals for Kenwood WD-K10 Series

This manual is also suitable for:

Wd-k10pbsWd-k10bsWd-k10tr