Attaching The Belt Clip - Kenwood WD-K10PBS User Manual

4 Arrange the battery cable as shown in the illustration and push
in the battery.
Push in firmly until the catches are sitting on the battery pack.
5 Attach the rear cover and tighten the screws (x6).
After installing the battery pack, attach the battery cover and secure
it by tightening the screws. When attaching the battery cover, ensure
that no fine foreign material (including fiber, hair and sand) is caught
in between.

ATTACHING THE BELT CLIP

This unit can be attached to a belt using the supplied belt clip.
12
Catch
Catch
Screws (supplied)
The screws can become loose.
Tighten the screws firmly.
Tighten again periodically.
Belt clip
Catch