The use of 1.9 GHz band digital communication technology allows for crisp and clear calls to be made in confidentiality.
Licenses and application procedures are not required; the device can be used immediately on the day it was set up.
A flexible system can be set up, from a small-scale system using one Portable base WD-K10PBS or Base Station WD-
K10BS, to a large-scale system combining several base stations.
Up to 10 sub units can be connected to a base station (base unit) at Normal Audio Quality, and up to 5 sub units can be
connected at High Audio Quality.
The default Quality Mode during calls is Normal Audio Quality. However, for clearer and crispier calls, you can select
High Audio Quality.
Similar for 2 or more base stations in a baselink system.
Simultaneous bidirectional calls are possible.
The operation and usage environment of a sub unit may be limited when using it in Listening Mode configured for dedicated
receiving. However, more sub units can be operated with few base stations.
Press the [PTT] key on the transceiver to call immediately at any time, without any complicated operations.
Group calls can be made for up to 4 groups, according to different hierarchy and business use. You can contact all
members of the group simultaneously or talk with other groups even in Grouping operation.
Use a clip microphone for clearer calls with less noise even under a noisy environment.
This system allows external audio signals to be input to intercom calls, and intercom calls to be output to audio signal
The Portable base WD-K10PBS can be used continuously for 25 hours in the Transceiver Mode, and for 8 hours in the
Base Station Mode (when 4 transceivers are connected).
The Transceiver WD-K10TR can be used continuously for 20 hours.