Contents - Kenwood WD-K10 Series User Manual

1 INTRODUCTION
1.7 System Configuration
Non-Portable Type
0
Stand-alone
One Base Station WD-K10BS is operated as a base unit.
Up to 10 sub units can be connected at Normal Audio Quality using the Portable Base WD-K10PBS (Transceiver Mode) or
the Transceiver WD-K10TR. Up to 5 sub units can be connected at High Audio Quality (a maximum of 10 units (or 5 units
at High Audio Quality) can be used for simultaneous calls).
Note
To operate the Portable base as a sub unit, the mode on WD-K10PBS must be switched (
0
Blinking green
WD-K10TR
Blinking orange
WD-K10BS

Contents

WD-K10PBS
(Transceiver
Mode)
on page 38).
10