Kenwood WD-K10 Series User Manual page 71

5 OTHERS
5.1 Troubleshooting
Problem
The sub unit cannot You have exceeded the number of
connect even when it is connected units to a base station.
near the base station.
The Status LED lights
up in red.
A sub unit has not been registered
to the base station.
Calls cannot be made There are no empty channels in the
in the Listening Mode base station.
of Portable base WD-
K10PBS/Transceiver
WD-K10TR.
Cause
The number of sub units connected to a base
station is up to 10 in Normal Audio Quality or 5
in High Audio Quality for both stand-alone and
Baselink systems.
Register a sub unit to the base station.
Please consult the authorized dealer.
Solution
Contents
Reference
Page
on page 9
on page
36
-
70