Calling All Groups (All Call Mode) - Kenwood WD-K10 Series User Manual

3 MAKING A CALL

3.4 Calling All Groups (All Call Mode)

3.4 Calling All Groups (All Call Mode)
You can make a call to everyone in all the groups that are using transceivers.
1
Press and hold the
The All Call notification tone will emit from the transceivers of all group members and all groups can receive and
send calls.
Note
If a transceiver has been activated in All Call Mode, an invalid tone will emit, and this transceiver will not enter
0
All Call Mode.
2
Speak into the microphone while pressing the
3
Press and hold the
An End tone will emit and users will return to the "Group Call Mode" of their own groups.
0 Only the person who has pressed the [All Call] key in Step 1 can operate the steps to return to the "Group Call
Mode".
0 After returning to "Group Call Mode", all group members will automatically return to "Group Call Mode".
Note
All Call is canceled in the following situations.
0
When the time configured in All Call Time-out Timer has lapsed.
0
When the power of the transceiver that has started All Call is turned off, or when it is out of range.
0
[All Call] key.
[All Call] key again to end the call.
[All Call] key
[PTT] key on the clip microphone or transceiver.
Contents
52