Kenwood WD-K10 Series User Manual page 32

2 PREPARATION
2.1 Preparing the Device
Connecting to an External Wireless System Transceiver
Insert the guide of the transceiver connection cable into the groove of the transceiver, and secure tightly with screws. The
screws can be tightened by hand but in order to ensure water resistance, use a coin screwdriver to tighten or remove.
Precautions
0
When using two-way radio, do not use or place it on the charger. Be sure to remove it from the charger.
Note
Make sure to turn off the external transceiver before making a connection.
0
Contents
31