Kenwood WD-K10 Series User Manual page 28

2 PREPARATION
2.1 Preparing the Device
4
Arrange the battery cable as shown in the illustration and push in the battery.
Push in firmly until the catches are sitting on the battery pack.
5
Attach the rear cover to the transceiver unit and tighten the screws (x6).
After installing the battery pack, attach the rear cover and secure it by tightening the screws.
Precautions
0
When attaching the rear cover, ensure that no fine foreign material (including fiber, hair and sand) is caught in
between, so as to maintain the dust resistant/water resistant performance.
To maintain the water resistant performance, please check with the authorized dealer.
Catch
Catch
Catch
Contents
27