Broadcasting - Kenwood WD-K10 Series User Manual

3 MAKING A CALL

3.8 Broadcasting

3.8 Broadcasting
This function uses external devices to broadcast directly to a facility or floor.
Activating the Broadcast Function
The following activation methods are available for performing broadcast.
Broadcasting by Pressing the [Broadcast] Key on page 61
Activate and deactivate the Broadcast function using the [Broadcast] key and talk by pressing the [PTT] key.
Broadcasting by Pressing the [PTT] Key on page 62
Link the activation and deactivation of the Broadcast function to the operation of the [PTT] key to broadcast.
Broadcasting by Pressing the [Broadcast(PTT Link)] Key on page 63
Activate and deactivate the Broadcast function using the [PMR Link (PTT Link)] key and link the call to the key operation
to broadcast.
Precautions
0
The [Broadcast] and [Broadcast(PTT Link)] functions are not assigned to the function keys by default. Assign the functions
to any function keys.
To configure the operation of the [PTT] key or to assign functions to any function keys, consult the authorized dealer or
installer.
0 To use the Broadcast mode function, it is necessary to connect external devices and set up the system. For details, please
consult the authorized dealer or installer.
Note
By assigning the Broadcast (PTT Link) function to any function key, you can activate the Broadcast function and start
0
the broadcast by a single [Broadcast(PTT Link)] key operation. Similarly, you can also end the broadcast by a single
operation.
Contents
60