Download  Print this page

Performing Pmr Link By Pressing The Pmr Link (Ptt Link)] Key - Kenwood WD-K10 Series User Manual

Dect intercom system
Hide thumbs

Advertisement

Table of Contents
3 MAKING A CALL
3.6 Performing PMR Link
Performing PMR Link by Pressing the [PMR Link (PTT Link)] Key
By assigning the PMR Link (PTT Link) function to any function key, you can activate the PMR Link function and start the
PMR Link by a single [PMR Link (PTT Link)] key operation. Similarly, you can also end the PMR Link by a single operation.
1
Press the
[PMR Link (PTT Link)]
The PMR Link function will activate and a mode change tone will emit. And the device enters into call state at the
same time.
Start the call after the mode change tone is emitted.
2
While pressing the
3
To end the PMR Link, release the
The users will return to the "Group Call Mode" of their own groups.
Note
The PMR Link function is canceled in the following cases.
0
When the time configured in PMR Link Time-out Timer has lapsed.
0
When All Call has started.
0
key.
[PMR Link (PTT Link)]
key, speak into the clip microphone.
[PMR Link (PTT Link)]
PMR Link
(PTT Link)
key.
Contents
58

Advertisement

Table of Contents
loading

  Related Manuals for Kenwood WD-K10 Series

This manual is also suitable for:

Wd-k10pbsWd-k10bsWd-k10tr