Kenwood WD-K10 Series User Manual page 40

2 PREPARATION
2.4 Setting Various Functions
2.4 Setting Various Functions
Adjusting the Receiver Volume Level
Use the [J]/[K] key to adjust to an appropriate volume level.
Use the [J] key to increase the current volume level by 1.
Use the [K] key to lower the current volume level by 1.
Note
Pressing and holding the [J]/[K] key does not adjust the volume continuously.
0
If you try to increase or decrease the volume when it is already at its maximum or minimum, a notification tone is emitted.
0
0
Lowering the volume level temporarily (Volume attenuation)
1
Press and hold the [K] key.
The volume level decreases to the value configured.
0
Pressing the [J] key during volume attenuation cancels the volume attenuation and restores the original volume
level.
Contents
39