Table of Contents
Advertisement
Passwords Page
Access the Passwords page (see figure 39) by clicking the
Settings page.
Figure 39.
NOTE: If the switcher is password protected, fields on this page can be edited only by
personnel logged in as administrators.
The fields on the Passwords page are for entering and verifying administrator and user
passwords. Passwords are case sensitive and are limited to 12 upper-case and lower-case
alphanumeric characters. Each password must be entered twice: once in the
and then again in the
asterisks (*****). If you do not want to password protect an access level, leave the
field and the
fields, click the
NOTE: An administrator password must be created before a user password can be
created.
To clear an existing password so that no password is required, enter a single space
character in the
Resetting a password
Reset an existing password so that no password is required as follows:
1.
Clear any existing password in both the Password and Re-enter Password fields.
2.
Tap the <space> bar once to enter a single ASCII space character in both the
Password and Re-enter Password fields.
3.
Click the
Passwords Page
Re-enter Password
field blank. After entering the desired password in both
Re-Enter Password
button.
Submit
and
Password
Re-enter Password
button.
Submit
FOX Matrix 320x and FOX Matrix 14400 • HTML Operation
Passwords
field. Characters in these fields are masked by
fields, and click the
link on the System
field
Password
Password
button.
Submit
65
Advertisement
Table of Contents
