Extron electronics FOX Matrix 320x User Manual page 76

SNMP General Settings fields
To edit the SNMP General Settings fields, ensure that the
selected (SNMP is disabled by default). Click the
button to abandon changes.
Cancel
SNMP Community Name fields — The two names are similar to passwords, granting
public, read-only [
SNMP (rd)
default names are and
public
Contact Name and Location fields — The two fields add optional information as to the
location of the NMS. By default,
SNMP Port field — This field identifies the port that the NMS uses to communicate with
the switcher and should only be changed by IT personnel. The default port is
SNMP Manager (Trap Target) fields
To edit each row of the SNMP Manager (Trap Target) settings, click the
to make the fields available for editing. The button changes to
associated settings, click the
The three fields identify up to three NMS targets to receive trap notifications of
IP Address
the switcher failure and repair status or a mix of trap types to the same target.
The check boxes and list boxes associated with each IP address field permit the operator to
specify specific criteria under which the switcher sends trap notifications.
• In the associated
Missing Input
absence of a signal.
Check the and
•
Fans Power
• In the associated
Notification Options
failures, fixes, both, not notified, or to remove the target from trap list (select
). The
SNMP Target Suspend
from the notification list when they are unavailable.
Submit
] and private, read-write access [
.
private
is assigned to the
Not Specified
button.
Save
list boxes, select the inputs to trap the presence or
boxes to trap the fans and power supplies.
list, select whether to notify the target of
option is useful for temporarily removing NMS stations
FOX Matrix 320x and FOX Matrix 14400 • HTML Operation
check box is
SNMP Enabled
button to save all changes or the
] to the NMS. The
SNMP (wrt)
and
Name Location
.
161
button
Edit
. After editing the
Save
Delete
fields.
69