Extron electronics FOX Matrix 320x User Manual page 36

Command and Response Table for SIS Commands (continued)
Command SIS Command
(Host to Unit)
Names
NOTES:
• The HTML language reserves certain characters for specific functions (see
• Do not use leading spaces in preset names.
• If a preset is unassigned, the
• If a global preset is saved, but not yet named, the default name is Preset •
• If a room preset is saved, but not yet named, the default name is Rm
EX&
Write global preset name
E
Example:
EX&
Read global preset name
E
Example:
Write room preset name EX*
E
Example:
EX*
Read room preset name
EX1@
Write input name
E
Example:
EX1@
Read input name
EX@
Write output name
E
Example:
EX@
Read output name
Resets
E
Reset global presets and
names
EX&
Reset one global preset
E
Reset all mutes
E
Reset room map
EX*
Reset individual room
E
Reset all room presets
Reset individual room preset EX*
E
Reset whole switcher
E
Absolute reset
E
Reset all device settings
X@
KEY: = Output number
X& = Global preset number
X* = Room number (for room presets)
X( = Name
X1) = Room preset number
X1@ = Input number (for other than tie)
Response
(Unit to Host)
X1)
displays [unassigned].
X( } X&
, NG Nmg
}
1,Security 1NG Nmg001,Security 1
} X(]
NG
}
2NG Security 2
X1) X( } X*
* , NP Nmp
}
1*3,Podium_DVDNP Nmp01*3,Podium_DVD
X1) } X(]
* NP
X( } X1@
, NI Nmi
}
1,Podium camNI Nmi001,Podium cam
} X(]
NI
X( } X@
, NO Nmo
}
1,Main PJ1NO Nmo001,Main PJ1
} X(]
NO
} ]
ZG Zpg
} X&]
ZG Zpg
} ]
ZZ Zpz
} ]
ZR Zpr
} X*]
ZR Zpr
} ]
ZP Zpp
X1) } X*
* ZP Zpp
} ]
ZXXX Zpx
} ]
ZQQQ Zpq
} ]
ZY Zpy
01 – (maximum number of outputs for your configuration)
001 – 064
01 – 10 (each can have up to 10 presets (
11 characters maximum for room names
12 characters maximum for all other names
00 – 10 (0 = current configuration for room)
01 – (maximum number of inputs for your configuration)
FOX Matrix 320x and FOX Matrix 14400 • Programming Guide
Additional description
Special Characters
X&
.
X* X(
• Prst .
X(]
,
]
Name global preset 1 "Security 1".
]
Global preset 2 is named "Security 2".
X1) X(]
* ,
]
Name room1, preset 3 "Podium_DVD".
X(]
,
]
Name input 1 "Podium cam".
X(]
,
] Name output 1 "Main PJ1".
Clear all global presets and their names.
Clear global preset
Unmute all outputs.
Clear all room definitions.
Delete room
Clear all room presets and names.
X1)] Clear an individual room preset and name.
*
Clear all ties and presets.
Similar to Reset whole switcher, plus clear
the IP address to 192.168.254.254 and subnet
mask to 255.255.000.000.
Similar to absolute reset, above, but excludes
the following IP settings: IP address, subnet
mask, gateway address, unit name, DHCP
setting, and port mapping (telnet, Web, and
direct address).
X1) s) assigned)
on page 35).
X&
.
X*
.
29