Installation; Setup And Installation Checklist; Get Ready; Configure The Matrix Switcher - Extron electronics FOX Matrix 320x User Manual

Installation

This section details the installation and configuration of the FOX matrix switchers, including:
•
•
•
•

Setup and Installation Checklist

Get Ready

c
c

Configure the Matrix Switcher

c

Perform Physical Installation

c
c
c
c
c

Install Software

c
Setup and Installation Checklist
Rear Panel Boards, Cabling, and Features
Front Panel Features
Reset Operations
Familiarize yourself with the matrix switcher.
Obtain IP setting information for the matrix switcher from the local network administrator
(see Ethernet Connection, beginning on page 82).
Install the desired I/O boards (see
Panel on page 75).
If desired, install the switcher in a rack (see
Cable input and output devices to the I/O ports (see
As desired, connect computers, control systems, or both to the rear panel Remote port
(see Remote Port on page 13), LAN port (see
front panel Configuration port (see
Connect power (see Power Supply Modules and Indicator LEDs
Test the switcher by creating a tie (see the
Install the Matrix Switchers Control Program (see
Removing and Installing an I/O Board or Blank
Mounting the Switcher
I/O boards
Ethernet Connection
Front Panel Features
Create ties SIS commands on page 25).
Installing the Software
FOX Matrix 320x and FOX Matrix 14400 • Installation
on page 74).
on page 10).
on page 14), and
on page 16).
on page 15).
on page 37).
7