Extron electronics FOX Matrix 320x User Manual page 61

• Physical Switcher Layout — Calls the FOX matrix switcher
dialog box (see figure 28), which displays the I/O board type installed in
Configuration
each slot. The
Channels
figure 28, for example, input 49 is identified as slot 4, input transceiver 1 (4i01).
Physical Configuration Dialog Box
Figure 28.
• Name Presets — Allows you to assign a name to each of the 64 global presets and
100 room presets.
NOTE: Preset names are limited to 12 upper- and lower-case alphanumeric
characters, <space>,
characters for specific functions (see
• Show RS-232 Strings — Displays the ASCII commands that are used by the current
configuration. You can refer to these for SIS programming.
• Room configuration — Allows you to assign outputs to or delete outputs from
rooms.
NOTE: A room is a subset of outputs that are logically related to each other, as
determined by the operator. The FOX matrix switcher supports up to 10 rooms,
each of which can consist of from 1 to 16 outputs.
Initialize ... — Initializes and clears any or all of the following: ties, presets, preset
•
names, icon names, and icons.
panel can be helpful in identifying a specific input or output. In
, and characters. The HTML language reserves certain
_ /
Special Characters
FOX Matrix 320x and FOX Matrix 14400 • Matrix Software
Physical
on page 35).
54