Extron electronics FOX Matrix 320x User Manual page 60

Tools menu
Assign Device Icons — Displays the complete set of
•
input and output device icons. You can drag any of these
icons to the input and output boxes.
Edit Device Palette — Allows you to add your own
•
device icon graphics.
• Mute-Output settings — Displays the
dialog box, from which you can mute each output.
• FOX Re-clocker settings — Displays the
Reclocking Rate Settings
can select the reclocking rate for one or all outputs and
mute and unmute the output.
• View Input Frequencies — Displays the
dialog box, which shows the data rates for
Detection
SDI and HD-SDI inputs only. This selection is not available
if no BNC 3G/HD/SD-SDI I/O boards are installed.
• Update Firmware ... — Allows you to replace the
firmware that is coded on the control board of the switcher without taking the switcher
out of service (see Updating Firmware
• IP Options — Allows you to set IP options (see
on page 43).
• HTML file manager — Displays a list of HTML files installed on the switcher and
allows you to upload custom files from a PC connected to the switcher (see
HTML files on page 51).
• Hardware status — Provides an overall view of the status of the matrix
switcher, including the power supply voltages, the internal temperature, the
Remote RS-232/RS-422 port configuration, and the installed and updated firmware
status (see figure 27).
Figure 27. Status Dialog Box
Mute Adjust
FOX
dialog box, from which you
Input
on page 48).
IP Settings / Options Dialog Box
Proper operation.
Component has failed.
FOX Matrix 320x and FOX Matrix 14400 • Matrix Software
Uploading
53