Water; Water Supply - Henny Penny SmartCombi GSC62 series Planning And Installation Instructions

Smart Combi
™
Classic Combi
™
Global Foodservice Solutions

5 Water

5.1 Water supply

The unit is equipped with two water connections:
a soft water connection for producing steam
●
a hard water connection for cooling waste water, for operating the
●
hand shower and for the automatic cleaning system "WaveClean"
For units that are equipped with the "WaveClean" automatic cleaning
system, use of "WaveClean" is not possible without a hard water
connection.
NOTICE
Both water supplies must always be connected.
Hard and soft water connections can be made via a hose with a
T-piece (accessory) in the event that only soft water is available on
site (see Chapter "Fitting the T-piece (accessory)", Page
NOTICE
When using the stacking kit (accessory), the upper and lower units
must be connected independently so that the other unit can still be
used in the event that one unit fails.
1. Observe information about the hard water supply (see
"Information about the hard water supply", Page
2. Observe information about the soft water supply (see
"Information about the soft water supply", Page
3. Ensure that customer-supplied water hoses fulfil the requirements
for the hard and soft water supplies (see
soft water", Page 17
Page 17).
4. Make sure that the provisions for the supply of drinking water are
complied with (see
5. Ensure that the water stop-cock is fitted with a backflow preventer.
6. Use ½" hoses with an R ¾" thread permitted for connecting drinking
water for the connection.
NOTICE
Use DVGW-tested hoses, or hoses conforming to the local regulations,
according to IEC 61770.
Planning and installation instructions
Chapter "Specifications,
and Chapter "Specifications, hard water",
Chapter "Water", Page
Water
34).
Chapter
33).
Chapter
33).
5).
31