Water
Automatic cleaning system
"WaveClean"
5.1.3 Fitting the T-piece (accessory)
34
Warm water leads to increased water consumption and should not be
used.
The water temperature must not exceed 50 °C (122 °F).
Units that are equipped with the "WaveClean" automatic cleaning system
must always be connected to a hard water and a soft water supply.
Otherwise, cleaning with "WaveClean" is not possible.
Hard and soft water connections can be made via a hose with a T-piece
(accessory) in the event that only soft water is available on site.
Figure 9: Position of the T-piece
Planning and installation instructions
Smart Combi
™
Classic Combi
™
Global Foodservice Solutions