- If you press "SET" button, the set power management method will be applied to the system.
But if there is no "SET" button input for certain time (about 10 sec.), the setting will not be ap-
plied to the system, it returns to the previous screen, and the previously set method will be
Setting whether to display cycle information
In LG ACCS, which is the operation program of the ACP, you can monitor the cycle information of
the outdoor unit connected to the ACP. But, to see the freezing cycle of the outdoor unit, you
must make a maintenance contract with a maintenance company in advance, and a separate de-
vice installation may be required.
- When you press the 'SET' button of the ACP, menu screen will be displayed.
Use up and down (▲, ▼) buttons to select [Contents], and press "SET" button again.
While [CYCLE] is selected, if you press "SET" button, you can set to view the outdoor unit
• To see the outdoor unit cycle information, you need to replace PI485 and set the outdoor
number that can see the cycle information.