Operating ACP with ACCS
Changing outdoor unit information
When indoor unit address lock is set, central control address cannot
be changed from the indoor unit remote controller.
You can change the name of the outdoor unit, central control ad-
dress, outdoor unit capacity, and the number of the connected in-
door units. After changing the information, you must press
When you change the number of the connected indoor units, if
you input a smaller number than the number of the indoor units
already connected, the last input indoor unit is deleted first, and if
you input a larger number than the number of the indoor units al-
ready connected, it will ask the first address of the indoor unit to
be added, and it will add the indoor units by the number of the in-
door units to be added by finding an empty address from the
input address one by one.