Setting the ACP network address
After connecting the ACP to various devices via the cable, the network environment of the ACP
should be set by driving the ACP. The following information should be set for using the ACP.
- IP address of the ACP
- Gateway address
- Net mask
Setting the network environment information
• If the above information is not entered, the communication error may be occurred or it
may be impossible to control by the ACP. So, be careful to correctly input.
Before conﬁguring the ACP environment
The network environment of the ACP can be set by the LCD and the buttons at the front side of
The current ACP information and the menu are displayed on the LCD, and the menu can be
changed and selected by pressing SET and (*) button and Up/Down/Left/Right (▲, ▼, ◀, ▶) but-