Ventilation Control Screen and unique features
Unique features
Heat
Exchange
Mode
Normal
Auto
Power sav-
ing
Quick
Options
Heater
Humid
※ Humid can only be turned on when the operation mode of the direct cooling type ventilation is
in heating mode.
!
NOTE
Additional function
• Additional function may not be included in some products.
Set both air intake and discharge to ventilate through electric heat ex-
changer. (It is used in Summer/Winter when there is a big difference of
temperature and humidity between indoor and outdoor.)
Measure the temperature of indoor and outdoor and automatically set
the temperature to maintain the optimal state. (It automatically controls
air intake and discharge to maintain uniform balance of the indoor air.)
Set the discharged air to ventilate without going through electric heat
exchanger. (It is used in Spring/Fall when there is a small difference of
temperature and humidity between indoor and outdoor.)
Execute the power saving operation function. (Power saving operation
operates by finding the most efficient state of the ventilation equipment
to save power consumption.)
Execute Quick ventilation function. (Rapid ventilation is the operation to
prevent the contaminated air or humidity of one room from spreading to
another room.)
Execute heater function. (Heater function is the operation to supply
warm air during Winter when the air outside is cold.)
Execute Humid function. (Humidification function is the operation to in-
crease humidity when the air is too dry.)
Operating ACP with ACCS
23