- Insert USB memory or SD card into the ACP. (Refer to software update and data backup)
- Press "SET" button of the ACP.
Select [Function] menu, and press "SET" button.
Select [DB recover] menu, and press "SET" button again.
Select [USB] or [SD card], and press "SET" button.
Remove USB memory after completing the data recovery.
ACP is automatically restarted for data recovery.
PQCPC22A0
CAUTION
!
• Before data recovery is completed, turning off the power of the ACP or removing USB
memory or SD card may cause severe disorder of the ACP.
Click SET
button
Click SET
button
Click SET
button
Automatic
restart of ACP
Installing ACP
105