ProSoft RadioLinx RLXIB-IESC User Manual page 88

RLXIB-IESC ♦ 802.11a, b, g
RadioLinx® Industrial 802.11abg Serial and Ethernet Client
The antenna polarity depends on the feed antenna polarization.
6.3.8 RLXIB-IESC Approved antennas
In the U.S. and Canada, you can only use antennas that are specifically
approved by the U.S. Federal Communications Commission (FCC) and Industry
Canada for use with the RLXIB-IESC radio. Contact ProSoft Technology or visit
www.prosoft-technology.com for a current list of approved antennas.

Whip

Collinear array

Yagi array (page 87)

Parabolic reflector (page 87)
Antenna selection depends on whether the bi-directional amplifier is being used
or not. For each approved antenna, there is a specified minimum distance the
antennas must be separated from users for safe exposure limits, according to
FCC part 2.1091.
Approved antennas in Europe and other countries accepting CE (page 89)
Approved antennas in Mexico (page 89)
Page 88 of 98
Reference
User Manual
ProSoft Technology, Inc.
May 25, 2010