ProSoft RadioLinx RLXIB-IESC User Manual page 55

Radio Configuration / Diagnostic Utility
User Manual
It also supports a selection of standard SNMP traps, including Cold Start, which
is sent when the radio initializes.
4.4.2 Change password
This configuration page opens when you click the Login Password button on the
Radio Configuration form.
Field
Old
New
Repeat
Save
Cancel
You can enter any alphanumeric value between one and 31 characters. The
password is case-sensitive.
If you forget your password, you will be unable to change the radio settings. To
get the default password again, see Troubleshooting (page 28).
ProSoft Technology, Inc.
May 25, 2010
RadioLinx® Industrial 802.11abg Serial and Ethernet Client
Description
Enter the current password in this field. The default password is
"password" (lower case, no quotes). This entry must exactly match the
current password, otherwise the change will be rejected.
Enter the new password in this field. Passwords are case sensitive.
Confirm the new password in this field. This entry must exactly match
the password you entered in the "New" field, otherwise the change will
be rejected.
Saves your changes and updates the radio configuration.
Discards your changes without updating the radio configuration.
RLXIB-IESC ♦ 802.11a, b, g
Page 55 of 98