ProSoft RadioLinx RLXIB-IESC User Manual page 62

RLXIB-IESC ♦ 802.11a, b, g
RadioLinx® Industrial 802.11abg Serial and Ethernet Client
5.3.2 Assign IP
If the radio is connected to a network with a DHCP server, the radio may already
have an IP address assigned to it. If no address appears, double-click the radio
listing in the RLX-IH Browser or select Assign IP in the AP Operations menu. In
the next window, click OK to accept the temporary IP address, subnet mask, and
default gateway. If necessary, you can enter a particular IP address (see Radio
Access settings (page 52)). After an IP address is assigned, you can configure
radios through the Radio Configuration / Diagnostic Utility (page 31).
5.3.3 Update Firmware
"Firmware" is the program that runs in the RadioLinx
and Ethernet Client that allows it to communicate and exchange data between
devices, using the radio as a network connection. Different versions of the
firmware communicate with other radios in different ways, and provide different
levels of functionality.
Page 62 of 98
RadioLinx Industrial Hotspot Browser
®
Industrial 802.11abg Serial
ProSoft Technology, Inc.
User Manual
May 25, 2010