File Menu - ProSoft RadioLinx RLXIB-IESC User Manual

RadioLinx Industrial Hotspot Browser
User Manual
5.2

File Menu

The following commands are available on the File menu:
5.2.1 Scan Setup
The Scan Setup command allows you to change some settings that govern how
the RLX-IH Browser scans for radios. In the top field of the Scan Setup dialog
box, you can adjust how often the program automatically scans for radios. Enter
a value (in seconds) to have the RLX-IH Browser scan at that rate.
In the New address/range fields, you can adjust how the program scans for
radios. By default, the program sends a broadcast message to all the radios at
the same time, looking for a response. Broadcasts are limited to a local network,
and will not be passed through a router. If there is a router between the PC
running the RLX-IH Browser and the radio to be scanned, the IP address of the
radio or a range of addresses can be added to the scan list. At each interval
determined by the scan rate, each IP address is individually queried.
ProSoft Technology, Inc.
May 25, 2010
RadioLinx® Industrial 802.11abg Serial and Ethernet Client
RLXIB-IESC ♦ 802.11a, b, g
Page 59 of 98