ProSoft RadioLinx RLXIB-IESC User Manual page 52

RLXIB-IESC ♦ 802.11a, b, g
RadioLinx® Industrial 802.11abg Serial and Ethernet Client
Note: Clients often support more than one WEP key. Packets received can be decrypted using any
one of the keys if programmed, but packets are always transmitted with the "default" WEP key
number. If you set a transmit key number on the RLXIB-IESC, make sure all other radios and
clients have this key programmed. To set keys other than key 1 on some clients using Windows,
you might have to use the Advanced settings.
Programming more than one key on the RLXIB-IESC requires setting the key
number to the key you want to program, entering the key, and saving your
changes. Repeat these steps for each key you want to program, saving after
each one; finally, change to the desired transmit key number if necessary and
save again (If "****" remains in the key field, the previously programmed key will
not be changed when changes are applied)
Page 52 of 98
Radio Configuration / Diagnostic Utility
ProSoft Technology, Inc.
May 25, 2010
User Manual