Printing Measured Values - AEMC 1060 User Manual

Second Function - MR
The MR function allows a recall of any saved data from memory, regardless of the
position of the rotary selector switch.
• When the button is pressed, the MR symbol is displayed. The small dis-
play indicates the last OBJ : TEST number to be assigned (e.g. 02 :11).
• 02 "11" flashes opposite the TEST symbol. Use the
select the desired OBJ : TEST number.
• If a new OBJ is selected, TEST is automatically set to the maximum
stored number. At this stage it is possible to review the entire memory
with the and
to the selected OBJ : TEST number are displayed on the main display.
Use the R-DAR-PI button to scroll through them.
• The V/TIME button gives access to the date/ time/ V / OBJ-TEST number
for each result.
• If the recording selected by the OBJ : TEST number corresponds to a
time-controlled test, the R(t) values can be accessed by pressing the
R(t) button. The small display changes and indicates min:sec (time of 1st
sample) and the symbol
the other samples with the
To exit from R(t) mode and return to the normal memory recall mode (OBJ :
TEST), press R(t) or R-DAR-PI again. To exit the MR function, press the MR
button once again or turn the selector switch.

5.3 Printing Measured Values

(PRINT/PRINT MEM Button - Model 1060)
If you use a serial printer, choose the appropriate communication speed (com-
munication rate) in the SET-UP menu, between 300...9600 communication, then
program the printer to the format run by the instrument (see § 5.1).
If you are using a parallel printer, you should set the communication rate to "Paral-
lel" when in SET-UP and use the optional serial-to-parallel adapter.
There are two printing modes possible:
• Instantaneous printing of measurement (PRINT)
• Printing of recorded data (PRINT memory)
If the data transmission to the printer is successful, the COM symbol flashes
once on the screen. If a problem has occurred, the COM symbol remains on the
LCD screen without flashing.
Megohmmeter Models 1050 /1060
buttons, since the measurement values corresponding
flashes on the screen. You can scroll through
button.
and buttons to
35