AEMC 1060 User Manual page 53

This will open the session properties dialog box:
Once you have completed filling in all the information on the screen, press
5.
OK. This will open a dialog box allowing you to add a descriptive name for the
object and test just performed.
Press the OK button. The information is now saved to disk.
6.
You will then be asked if you want to open the database just downloaded.
7.
Click the Yes button, which will open a dialog box labeled Create View from
Template.
In the Groups window of this dialog box, click on "megohmmeter" and in the
8.
Templates window click on "Megohmmeter 1060 Summary Report".
In the Step 2: Specify Database(s) window, the file you just saved and named
9.
should be visible. If this is the file you wish to generate a report from, click the
OK button. The report will now be available on the screen including graph,
individual data points and all statistical data.
10. To print this report, either click on the Print icon or click on the File command
and then Print.
This completes the process of configuring, running, retrieving data, and printing a
report using DataView
Megohmmeter Models 1050 /1060
Figure 7-9
® with your Model 1060 megohmmeter.
51