2.5.6
Button
Changes the flashing parameters displayed, or views R(t) values (see § 2.5.3).
As a general rule, two figures (day, month, hour, min., sec., and OBJ:TEST)
flash.
The
and
functions have a "follow-on" mode. (e.g. as soon as the high or low
program limit is reached, the parameter to be modified switches automatically to
the following low or high limit.)
First Function
•
Press button briefly to increase the displayed number slowly
•
Press button for a longer time to increase at a faster rate
Second Function
•
Press button briefly to decrease the displayed number slowly
•
Press button for a longer time to decrease at a faster rate
Unlike all the second functions of other buttons, it is not necessary to press the
button each time to get to the
and is valid for the
pressing
or another button.
2.5.7
SET-UP Function
Configures the instrument.
After selecting SET-UP with the rotary selector switch:
•
All the display segments are lit up for 1 second
•
The software version number is displayed
•
The instrument serial number is displayed
•
"PUSH" comes up on the small display and "btn" on the main display,
inviting the operator to press a button
The SET-UP function is used to directly access the parameters to be pro-
grammed, by pressing the corresponding button:
•
After having pressed a button, the corresponding figures or symbols
appear on the screen
•
The figures or the symbols that can be modified flash on the screen
•
Use the
and
•
All the parameters are immediately and permanently saved
Megohmmeter Models 1050 /1060
function. The
function (only), as long as the user does not deactivate it by
buttons
symbol remains displayed
17