In the Ready to Install the Program window, click on Install.
9.
10. If the feature selected for installation requires the use of a USB port, a warning
box will appear, similar to Figure 7-3. Click OK.
If USB drivers are not needed, setup will continue at Step 13.
11. The Install Driver dialog box will appear. Click on Install.
NOTE: The installation of the drivers may take a few moments. Windows may
even indicate that it is not responding, however it is running. Please wait for it to
finish.
44
Figure 7-2
Figure 7-3
Figure 7-4
Megohmmeter Models 1050 /1060