Instantaneous Printing Of Measurements (Print Button) - AEMC 1060 User Manual

5.4 Instantaneous Printing of Measurements
Following a measurement or after accessing values in MR mode, use the PRINT
function to print the measurement results.
NOTE: PRINT only works when the test is stopped by pressing the START/STOP
button and the value is displayed on the LCD.
Press the PRINT button to print the following:
• 1 set of measurements (V/ R/ DAR/ PI / date/ time) for normal tests.
• The R(t) values if the "time-controlled test" has been used.
To stop printing, move the position of the selector switch.
According to the function used, the following models are obtained:
Insulation Measurement
AEMC Instruments Model 1060
®
Instrument number: 000 001
INSULATION RESISTANCE TEST
OBJECT: 01 ..................................... TEST: 01
Description: ....................................................
........................................................................
Date: ............................................03.31.2001
Start time: ............................................14 :55
Test duration: ......................... 15 min. 30 sec
Temperature: ..............................°C ......... °F
Relative humidity: ...................................... %
Test voltage: ....................................... 1000V
Insulation resistance (R): ............... 385GOhm
DAR (R 1'/R 30"): .................................1.234
PI (R 10'/R 1"): ......................................2.345
Comments: ....................................................
........................................................................
Date of next test: ............................../..../.......
After a 'time-controlled test' other results are printed (interval samples):
Time
00 : 30
01 : 00
01 : 30
etc...
A space for the operator's signature is available at the end of the printout.
36
Resistance
35.94 GOhm
42.00 GOhm
43.50 GOhm
(PRINT button)
(only printed in MR mode)
Voltage
1005V
1005V
1005V
Megohmmeter Models 1050 /1060