AEMC 1060 User Manual page 44

NOTE: When installing, the user must have Administrative access rights
during the installation. The users access rights can be changed after the
installation is complete.
DataView must be reinstalled for each user in a multi-user system.
®
Insert the DataView
1.
If auto-run is enabled, the Setup program will start automatically. If auto-run
is not enabled, select Run from the Start menu and type in D:\SETUP (if your
CD-ROM drive is drive D. If this is not the case, substitute the appropriate
drive letter).
NOTE: If installing onto a Vista based computer, select Allow to proceed.
A Set-up window, similar to the one below, will appear.
2.
There are several different options to choose from. Some options
internet connection.
• DataView, Version x.xx.xxxx
• * Adobe Reader - Links to the Adobe
version of Adobe
viewing PDF documents supplied with DataView
the Help menu.
42
CD into your CD-ROM drive.
®
Figure 7-1
- Installs DataView
®
Reader to the computer. Adobe
®
onto the PC.
®
website to download the most recent
Reader is required for
®
that are accessible from
®
Megohmmeter Models 1050 /1060
( )
require an
*