AEMC 1060 User Manual page 25

The main display indicates the continuity or resistance value in progress, while the
small display indicates the voltage present on the "+" and "–" terminals.
The R-DAR-PI, V/TIME and SMOOTH buttons are not active for these functions.
WARNING: If, during continuity or resistance measurement, an external voltage
>25V ±3V or 35V
AC
voltage is applied to the instrument.
The symbol flashes and the voltage value is indicated on the small digital
display.
If the ALARM function is activated, a buzzer is triggered as soon as the measure-
ment crosses the threshold programmed in the SET-UP configuration menu.
Megohmmeter Models 1050 /1060
is detected, the measurement is stopped as long as the
DC
23