Table of Contents
Advertisement
Second Function - MR
The MR function allows a recall of any saved data from memory, regardless of the
position of the rotary selector switch.
• When the button is pressed, the MR symbol is displayed. The small dis-
play indicates the last OBJ : TEST number to be assigned (e.g. 02 :11).
• 02 "11" flashes opposite the TEST symbol. Use the
select the desired OBJ : TEST number.
• If a new OBJ is selected, TEST is automatically set to the maximum
stored number. At this stage it is possible to review the entire memory
with the
to the selected OBJ : TEST number are displayed on the main display.
Use the R-DAR-PI button to scroll through them.
• The V/TIME button gives access to the date/ time/V/ OBJ-TEST number
for each result.
• If the recording selected by the OBJ : TEST number corresponds to a
time-controlled test, the R(t) values can be accessed by pressing the
R(t) button. The small display changes and indicates min:sec (time of 1st
sample) and the symbol
the other samples with the
To exit from R(t) mode and return to the normal memory recall mode (OBJ :
TEST), press R(t) or R-DAR-PI again. To exit the MR function, press the MR
button once again or turn the selector switch.
5.3 Printing Measured Values
(PRINT/PRINT MEM Button - Model 1060)
If you use a serial printer, choose the appropriate communication speed (com-
munication rate) in the SET-UP menu, between 300...9600 communication, then
program the printer to the format run by the instrument (see § 5.1).
If you are using a parallel printer, you should set the communication rate to "Paral-
lel" when in SET-UP and use the optional serial-to-parallel adapter.
There are two printing modes possible:
• Instantaneous printing of measurement (PRINT)
• Printing of recorded data (PRINT memory)
If the data transmission to the printer is successful, the COM symbol flashes
once on the screen. If a problem has occurred, the COM symbol remains on the
LCD screen without flashing.
Shop for AEMC products online at:
36
and
buttons, since the measurement values corresponding
ShopAEMC
www.
flashes on the screen. You can scroll through
button.
.com
and
1.877.766.5412
Megohmmeter Models 1050 /1060
buttons to
Advertisement
Table of Contents
