Ex9-Oet (Output Block For Low Wattage Load) - SMC Networks EX9-OET1 Operation Manual

■
EX9-OET (Output block for low wattage load)
•Location
The Output block for low wattage load cannot be placed closer to the valve manifold than the Power block.
If the Output block for low wattage load is positioned like this, it will not operate.
The correct position is with the Output block for low wattage load located between the SI unit and the
Power block.
[Example]
: There is no continuous line on the product
labels. (Incorrect positioning)
: There is a continuous line on the product
labels. (Correct positioning)
-13-
○: This is possible to use it.
×: This is not possible to use it.
No.EX※※-OMH0025-C