Table 12: Gvc3202 Lldp Configuration Parameters; Table 13: Gvc3202 802.1X Mode Parameters; Lldp Settings - Grandstream Networks GVC3202 User Manual

LLDP SETTINGS

Access GVC3202 home screen, go to Applications->Settings->Network->LLDP to configure LLDP
settings on GVC3202.
Parameters Descriptions
LLDP Enable or disable LLDP. The default setting is disabled.
Layer 3 QoS for This field defines the layer 3 QoS parameter for SIP packets. It is the value used
SIP for IP Precedence, Diff-Serv or MPLS. The default value is 48.
Layer 3 QoS for
This field defines the layer 3 QoS parameter for audio packets. It is the value used
Audio for IP Precedence, Diff-Serv or MPLS. The default value is 48.
Layer 3 QoS for This field defines the layer 3 QoS parameter for video packets. It is the value
Video used for IP Precedence, Diff-Serv or MPLS. The default value is 48.
802.1X MODE
Access GVC3202 home screen, go to Applications->Settings->Network->802.1x Mode. By default, 802.1x
is disabled. Selecting 802.1x mode to "EAP-MD5", "EAP-TLS5" or "EAP-PEAP" to turn on 802.1x. Once it
is enabled, the user will be required to enter the identity and password to be authenticated in the network.
Parameters Descriptions
Allows the user to enable/disable 802.1x and configure 802.1x mode. The
802.1x Mode
default setting is disabled.
Identity Enter the Identity information for 802.1x mode.
MD5 Password Enter the MD5 Password for 802.1x mode.
CA Certificate Upload the CA certificate for 802.1x mode.
Client Certificate Upload the CA certificate for 802.1x mode.
Private Key Upload the private key for 802.1x mode.
Firmware Version 1.0.0.X

Table 12: GVC3202 LLDP Configuration Parameters

Table 13: GVC3202 802.1x Mode Parameters

GVC3202 User Guide Page 39 of 117