Regulatory Information FCC: Industry Canada: Class B Equipment This Class A digital apparatus meets all requirements of the Canadian This equipment has been tested and found to comply with the limits for a Interference Causing Equipment Regulations. Class B digital device, pursuant to Part 15 of the FCC Rules. These limits Cet appareillage numérique de la classe A répond à...
Page 3
Turn On Operator WiFi Toggle OFF/ON BEEP...
Page 7
Setup FULL CLOSE Continue to Settings Reload this page...
Page 8
Settings: Speed/Force & Timing/Location Speed/Force and Timing/Location settings must be adjusted to meet ANSI BHMA A159.19 (American National Standard for Power Assist and Low Energy Power Operated Doors) requirements for opening and closing based on door weight d width. Setup complete! The following pages are for additional information.
Settings: Options Settings: Save/Restore Settings: Options Settings: Save/ and Connections Restore is used to vary by application. transfer settings to other operators You can skip these OR to restore sections if you customized do not need to settings from a customize control saved file.
Page 10
Connections External inputs must be connected. (See separate Programming Instructions for details.) 80-9363-0015-020...
Page 11
Support: Restoring Factory Default Settings For full programming instructions and wiring diagrams, refer to Programming Manual included 80-9363-0015-020 with your operator or online at nortondoorcontrols.com All settings will reset to factory default.