Table of Contents
Advertisement
D6001DE-L Series Double Egress Power Operator Unit
Install Arms to Left Door
A. Mount Forearm and Shoe.
1. Using previously prepared holes in door,
install two (2) 1/4-20 x 1-5/8" screws through
shoe and into sex bolts. (Figure 20)
NOTE: Orient shoe with long side of shoe
toward hinge. (Figure 21)
B. Install Main Arm.
1. Open left door.
2. Slide forearm into main arm adjusting tube.
(Figure 22)
3. Place square of main arm onto closer pinion.
(Figure 22)
NOTE: Pinion flat should be aligned as
shown. (Figure 23)
4. Attach main arm to pinion with screw then
tighten with 7/16" wrench. (Figure 22)
5. With door closed, rotate main arm away
from hinge until forearm is perpendicular
(90 degrees) with door. (Figure 24)
6. While holding arm in position, secure
forearm to adjusting tube with forearm
screw. (Figure 25)
Copyright © 2023, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or in part
without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9360-1048-020 Rev 1 01/23
Pinion Flat
Figure 23
Approved 2023-11-10
Forearm
Figure 20
Hinge
Long Side
of Shoe
View from ceiling looking downward
Figure 21
Pinion
Screw
Figure 22
Main Arm
View from ceiling looking downward
Figure 24
Main Arm
Adjusting Tube
Forearm
90º
Forearm
Screw
Figure 25
11
Advertisement
Table of Contents
