Management Ethernet Port Leds - HP FlexFabric 12900E series Installation Manual

Management Ethernet port LEDs

10/100/1000BASE-T management Ethernet port LEDs
The MPU provides LINK and ACT LEDs for each 10/100/1000BASE-T management Ethernet port to
indicate the link status and data forwarding status of the port.
Table 52 10/100/1000BASE-T management Ethernet port LED description
LINK
On
On
Off
SFP management Ethernet port LEDs (for the LSXM1SUPB1 and LSXM1SUP04B1 switches)
The SFP management Ethernet port LEDs and SFP port LEDs have the same indication. For the
LED description, see
Fan tray status LEDs
The MPU provides FAN OK and FAIL LEDs to indicate the status of the fan trays.
Table 53 Fan tray status LED description
OK
On
Off
Off
Power supply status LEDs
The MPU provides PWR OK and FAIL LEDs to indicate the status of the power supplies.
Table 54 Power supply status LED description
OK
On
Off
Off
Card status LEDs
The MPU provides a pair of RUN and ALM LEDs for each card. Each pair of LEDs indicate the
operating status of the card that has the slot number the same as the LED number.
ACT
Flashing
Off
Off
Table 58.
FAIL Description
Off All fan trays are operating correctly.
On A fan tray problem is present or no fan tray is in position.
Off The switch is not powered on.
FAIL Description
Off All power supplies are operating correctly.
On A minimum of one power supply is faulty.
Off The switch is not powered on.
Description
A link is present, and the management Ethernet port is receiving
or sending data.
A link is present.
No link is present.
103