Sealing Unused Connections In The Rugged Line Plug - Festo CPX-M-FB20 Manual

1. Installation
Additional power supply
Plugs
2
3
4
1 2 3 4 5
V : Load voltage for outputs
OUT
Tab. 1/8: Pin allocation: Additional power supply for outputs

1.5.2 Sealing unused connections in the Rugged Line plug

1-28
The outputs are supplied with load voltage via the
interlinking blocks with additional power supply
CPX-M-GE-EV-Z-7/8-5POL or CPX-M-GE-EV-Z-PP-5POL.
Pin assignment for additional power supply
Additional power supply type CPX-M-GE-EV-Z-7/8-5POL
1
1: 0 V
Out
2: Unused
5
3: FE
Additional power supply type CPX-M-GE-EV-Z-PP-5POL (Push Pull)
1: Not connected
2: Not connected
3: 24 V
Out
Note
Seal unused connections in the Rugged Line plug.
•
Use only sealing rubber which has not been broken
•
through.
You can then be sure of complying with protection class
IP65/67.
4: Unused
5: 24 V
Out
4: 0 V
Out
5: FE
Festo P.BE-CPX-FB20/21-EN en 1202a